Specifications
- IR Beam Throw: 1000 Meters
- Run Time: 240 Minutes - 18650
- Run Time: 150 Minutes - 2 pc CR123A
- LED & PCB: Fully Potted to Withstand Shock & Recoil
- Battery: 1 pc 18650 - 3.7V, Z-BOLT® 3500 mAh Lithium
- Weight: 178 grams / 6.7 oz (18650 battery installed)
- Length: 7.0 in. (178mm) (18650 - Long Barrel)
- LED Illuminator Head Width: 32mm
- Body Material: T6061 Aluminum Alloy
- Surface - Mil-Spec Hard Coat Anodized: Matte Black
- Warranty: 2 Years from Date of Purchase
- Part #: IR-LED-860-18650-BLK
Z-BOLT® Crane-Style Laser Ports
Z-BOLT® cable port tailcaps are compatible with Unity Tactical Crane-Style laser plug switches and a few other OEMs. Please Note: Many legacy Crane-Style (L3/Insight/EOTECH/Laser Devices/Steiner) switches will run the legacy/lower current draw (CR123A) Surefire 300/600 series lights; BE Meyers KIJI; & Malkoff light heads & devices. But may of these older switches can't pass the current needed to run modern, high current draw weapon lights. These older switch designs do not allow “full power” operation of 18350/18650 battery cell Z-BOLT® LEP, Modlite OKW & PLHv2, or Surefire® KE2-DF light heads. Typically these switches reduce output by 15-20%. (mostly related to thread gauge) So beware, your results with these switches may vary. Our tested & approved list:
Unity Hot Button (7” MLOK Laser, FDE) P/N: HBM-IF
Unity Hot Button (7” MLOK Laser, Black) P/N: HBM-IB
Unity Hot Button (7” PICATINNY Laser, FDE) P/N: HBR-IF
Unity Hot Button (7” PICATINNY Laser, Black) P/N: HBR-IB
Unity TAPS, Standard 2x Leads (9” Laser/Laser, FDE) P/N: TAPS-119F
Unity TAPS, Standard 2x Leads (9” Laser/Laser, Black) P/N: TAPS-119B
Unity ModButton Lite (4.5” PICATINNY Laser, FDE) Modlite Order Page Here
Unity ModButton Lite (4.5” PICATINNY Laser, Black) Modlite Order Page Here
Steiner eOptics / Laser Devices
7" Remote Cable Pressure Pad Switch P/N: 9120 OpticsPlanet Here
Please Note: Steiner P/N 9120 will not run the Surefire® KE2-DF light head. (Surefire® M600DF